Adaptor kit T5 gearbox 67-70
Article no: TRA-670-534
In stock
Ships within 1-3 business days.
6495 kr
- Information
-
Kit includes:1 TRA-650-526 Adapter Plate1 TRA-670-523 Crossmember Bar without parking brake bracket1 TRA-650-521 Trans Mount Insulator1 TRA-650-517 Drive Shaft Slip Yoke*Adapter plate requires 1 hole drilled and 1 drilled & tapped into the bell housing.Early ModelC3AA-6394-C 5 bolt patternC5AA-6394-B 6 bolt patternC5DA-6394-A 6 bolt patternC9OA-6394-A 6 bolt patternD2OA-6394-AA 6 bolt patternBell housing modification is required on all original (1964 1/2-1970) and late model bell housings to adapt the Borg Warner "standard" and "World Class" T-5 SROD (single rod overdrive) five speed transmission to an early model Mustang, and to utilize the stock clutch linkage.The modifications required, when using an original (1964 1/2-1970) bell housing, are to drill one clearance bolt hole and drill and tap a second bolt hole to attach the adapter/spacer plate to it. The spacer is required because of the longer transmission input shaft of the T5 transmission, and also adapts the T-5 mounting bolt hole pattern to the original bell housing.If you do not intend to use the early model clutch linkage and are opting for a cable installation, you can use the late model bell housing and late model throw out arm as they are, without any modifications required.Caution note - Always check the condition and fit of the crankshaft pilot bushing, since some T-5's have a smaller diameter pilot. Problems such as clutch chatter and popping out of gear will occur if the pilot bushing fit is not correct. Unit: Set - Related products
- Possible alternatives
- Set contains